Industrial / Motive Power Battery Covers
Injection molded jars and covers are available in a variety of materials including reprocessed polypropylene, standard grade polypropylene and flame retardant materials. Applications include Motive Power (traction), UPS Telecom and special applications.
Improved guide pins for cover to jar alignment.
Optional post configurations include:
- Fixed terminals featuring SuperLock cold form terminals for extraordinary sealing and improved torque values.
- Rubber grommets post seal
- Floating bushing type with O-Ring seal
- Epoxy Well Seal
Standard bayonet lug profile vent chimney with standard vent location or optional center vent well.
Optional logo insert area available
Covers available in polypropylene including V2 or V0 flame retardants.

Two Post Heat Seal Covers - Narrow Series
Plate Size | DIM Lenght | DIM Width |
---|---|---|
5 | 2.01 | 6.19 |
7 | 2.75 | 6.19 |
9 | 3.50 | 6.19 |
11 | 4.25 | 6.19 |
13 | 5.00 | 6.19 |
15 | 5.75 | 6.25 |
Four Post Heat Seal Covers - Narrow Series
Plate Size | DIM Length | DIM Width | DIM A |
---|---|---|---|
17 | 6.50 | 6.25 | 3.0 |
19 | 7.25 | 6.25 | 3.0 |
21 | 8.0 | 6.25 | 3.75 |
23 | 8.75 | 6.25 | 3.75 |
25 | 9.50 | 6.25 | 3.75 |
27 | 10.25 | 6.25 | 3.75 |
Six Post Heat Seal Covers - Narrow Series
Plate Size | DIM Length | DIM Width | DIM A |
---|---|---|---|
29 | 11.00 | 6.25 | 3.75 |
31 | 11.75 | 6.25 | 3.75 |
33 | 12.50 | 6.25 | 3.75 |